Concise and bright: Stentorian Basilisk Mod

Concise and bright: Stentorian Basilisk Mod

Stentorian Basilisk Mod

Basilisk is designed and developed by Stentorian Vapor, Wotofo is responsible for the distribution and Stentorian Vapor, the name may be a bit strange. But if you mention the water-cooled concept mainframe full of industrial wind, copper pipes, and transparent shell. Old irons should think of AT-7 for the first time. Yes, AT-7 with constant 4.2V regulated output is one of Stentorian Vapor’s works.

Inheriting AT-7, Basilisk also has a strong personal style, and this style is what I want. clean. Bright. Fast four words. I don’t know if you still have any impressions. I have mentioned that there are too many modes to switch to. Sometimes it is troublesome. Although storing various functions in the setting interface is one of the solutions, the other most fundamental way is to directly remove them Jing, Basilisk just reflects this spirit.

It only retains the two most commonly used modes of pressure regulation and taste curve for most players today
It is fine-tuned through the three outputs of Standard, Powerful, and Powerful+. The extremely simplified user interface has no complicated or too many other modes and functions. The appearance is made of metal materials and colorful resin with light and shadow changes, and is equipped with There are four rare transparent gaskets to protect the 510 port that is in contact with the atomizer
Just screw on the atomizer, set the output power, and fire, and you can start to enjoy the leisure in the smoke.

It is a pity that it cannot cooperate with the atomizer to change the initial output and the V value of the output will not be displayed when it is not fired. At the same time, Basilisk does not have a USB port, and this cannot be compensated by the update.

Stentorian Basilisk Mod

The large area of resin material on the side may be considered too common by most players, but Basilisk has added a variety of colorful and gradual colors. At the same time, under different angles of light, some areas will also have a little metallic light. The general processing has subverted the toy feel of general resin.

Stentorian Basilisk Mod

The top of the machine is engraved with the words Basilisk, and each corner of the fuselage has a specially designed rounded chamfer. The picture is deliberately lighted there, and you can see obvious lines at all angles. With the aforementioned processed side, the overall feeling is smooth and easy to hold, but not slippery.

Stentorian Basilisk Mod

Four protective gaskets are used to protect the top of the machine from wear marks caused by the atomizer, and also to prevent smoke oil from penetrating into the port.

Although it is only a small part, it is still enough to feel Stentorian’s intimate surface based on the player as the starting point. Unfortunately, the diameter of the gasket is about 24.5mm.
Long-term use of a 25mm atomizer may still cause scratches.

The operation mode is very simple: switch the machine five times, + &-lock the output power, fire & + change the mode, fire &-change the display direction, the modes include Standard, Powerful, Powerful+ and taste curve Rebuild. The displayed parameters are also only mode, power, output, ohm and V value. Some short-circuit, overheating, low resistance, etc…. protection also exists. There are no other settings or parameters, it is so simple and practical.

Powerful mode will output 1.5 times the set wattage during the first three seconds of firing. Powerful+ is about 1.8 times. The special feature is that its Rebuild mode is based on 0.5 second units, allowing players to experience a more delicate output. The changes brought about.

Stentorian Basilisk Mod

The length, width and height of Basilisk are about 552585mm, and the compatible ohm value is 0.1~3.0Ω

With 2436mm Aura or 2228mm Nudge, you can feel that the atomizer has a good visual effect whether it is a normal size or a small atomizer.

At the end of the article, the characteristics of Basilisk Mod are organized as follows:
. The operation is extremely simple, suitable for players who like simple and bright
. The large-area rubber body improves a lot of recognition and appearance under the mixed color and metallic feeling.
. The grip is smooth, although the body is slightly larger, it can be very handy
. Intimate four-piece 510 port protection gasket
. Recessed, moderate feedback force of three keys has a nice touch

There are also some designs that are difficult to define:
. Not suitable for players who want detailed adjustments
. Cannot display the output V value instantly
. If a 25mm atomizer is used, the width of the body and the size of the protective gasket are slightly insufficient

The above is the Stentorian Basilisk Mod brought for this time
I hope you can understand its features better

Review:
1.www.vapeciga.com, 50% discount for purchases on vapeciga.com
2.Absolute defense GeekVape Aegis three defense box