SteamCrave Glaz RTA V2: elegant and more transparent

SteamCrave Glaz RTA V2: elegant and more transparent

SteamCrave Glaz RTA V2

The Glaz series itself is a very attractive atomizer. The transparency from the inside out and the consistent artistic oil-conducting structure of SteamCrave are all retained in V2. At the same time, some of the improved designs have been improved: The glass elements of the outer chamber are enlarged again, and the inner frame is used to improve the protection and recognition. The angle of the inner air intake hole, the oil guide hole and the width of the oil passage have also been changed. The intuitive coil position and extremely smooth oil guide make it easy to use. The sense of experience evolved.

According to common sense, this series with a diameter of about 30mm is often mistaken for an atomizer that creates fog, but SteamCrave only increases its body shape to make the Glaz series satisfy people who want to be different or have a good looks. According to the player’s preference, through the wide-range drag resistance adjustment brought by the 17 air inlets in pairs and the straight-through small atomization chamber, Glaz RTA V2 is an uncompromisingly balanced atomizer. , Even when the air intake pressure is reduced to 1/2~1/3, the straight and concentrated aroma will make people forget its waist circumference. Its 7\10ml large belly can make players fully enjoy the taste and smell Feast.

The push-pull upper cover makes oil filling much more convenient. The full glass transparency and the rigid inner frame are dual-matched. The infinity column and the plan to ensure that the airflow can fully act on the inner compartment. From the inside out, Glaz is like a perfect piece The artwork produced after calculation. Now that the pursuit of compactness has become a trend, jumping out of the existing framework and embarking on a brand new adventure, this may be the surprise SteamCrave wants to bring to every player.

SteamCrave Glaz RTA V2

Open the outer box of the heaven and earth cover to see a wealth of contents: the main body, anti-collision ring, screwdriver, single and star double specification screws and O-Ring and other spare parts, manuals, simple assembly reminders and stickers; the main body can be disassembled into : 810 suction nozzle, top cover, inner frame, glass material inner atomization bin, two standard glass oil bins and one fat bin, silk table base and air intake adjustment ring.

SteamCrave Glaz RTA V2

Let’s take a look at the difference between V2 and the previous game. The black on the left is V2, and the right is Glaz RTA. Here, SteamCrave has made some sacrifices. In order to make the player’s visual effects more enjoyable, it discards its own logo in exchange for more Large-area glass warehouse body.
As the glass area increases, it naturally also increases the risk of collision. Here, SteamCrave uses a steel inner frame to provide some protection. This design also restricts the user’s process of assembling the smok V2. In some respects, it is also a disguised form. One extra component reduces the risk of breaking the internal glass bin due to improper assembly.

SteamCrave Glaz RTA V2

In addition, the V2 with better protection is not like the oil tank with PC material in the previous work. It is completely high-definition. Thanks to the support of the internal skeleton, the area of the oil channel outside the tank wall has increased a lot, which makes oil channel Glaz is highly efficient and has better resistance to deep absorption and long-term firing.

SteamCrave Glaz RTA V2

The inner diameter of the suction nozzle is wide and narrow at the mouth, and the bottom is a straight-through type, which can provide a certain amount of condensate reflux; Glaz RTA V2 is the same as the previous one, which is a push-pull top cover, which is the least likely to close , One of the ways to destroy the air pressure balance in the warehouse. The 9*3mm oil injection hole is very sufficient, and the resistance to push open is slightly tight, but there is a groove for placing the fingertips, so there is no need to worry about being hooked off after a long time of use and causing oil leakage. At the same time, just remove the internal word The screws can be easily disassembled, and the convenience and stability of cleaning the surface or refilling oil are greatly improved check.

Although the removable air intake adjustment ring is located at the bottom and has a small height, the full-grown diamond pattern still brings friction that is easy to rotate. This diamond pattern element is also consistent in the RTA produced by SteamCrave Characteristics.
When the airflow enters the 17 air intake holes at the bottom, it will be turned into an oblique blowing direction concentrated towards the center by the inner air intake holes. However, the difference from the previous version is that the inner air intake holes turn from the oblique direction to completely horizontal, but transparent. The inner walls passing through both ends allow the airflow to reflect and wrap the coils, and at the same time, there is a very inconspicuous slope at the vertical and horizontal intersection of the inner wall.

From left to right are V2 and Glaz RTA. The difference can be clearly seen under the comparison chart. In addition to the inner air intake, the groove on the bottom of the cotton foot is also changed. The first version is through the pair The double holes of the V2 absorb the e-liquid, and the V2 is directly replaced with a kidney-shaped large oil-conducting hole, which is the same convenient method of plugging cotton, but has a better oil-conducting effect.
There are two changes in V2 that I admire the most. The first is the obvious appearance brought about by the larger area of transparency, and the second is the design of the inner air inlet and the adjacent inner wall, which is relatively difficult to find. At this point, the calculation of the air intake direction and the reflection angle from the slope. These inconspicuous but calculated clever designs make this coil setup easier. In the previous work, I would suggest that the coil be close to the outside, and V2 only needs to be aligned. The lock wire hole can be put down vertically, so that you can enjoy the smoke that directly rushes through the nozzle after converging at the center of the inner warehouse, and the analysis is more intuitive and richer.

SteamCrave Glaz RTA V2

At the end of the article, the characteristics are summarized as follows:
. Divide the draw resistance from high to low from 1 to 11, which is in the range of 2 to 6.
. The analysis is a balanced and slightly condensed style.
. Transparency has improved a lot, and the feeling of healing has also improved.
. The inner air inlet is changed to a surrounding airflow, which can also ensure the complete function, but the wire is more intuitive.
. Comes with a fat bin and two glass bins, and players who are unlucky opponents have a higher fault tolerance rate.
. The internal oil passage has quietly become wider, making the oil guiding effect more beautiful and high-quality.
. The push-pull and easy-to-remove top cover is convenient for oil filling and cleaning.
. The oil storage capacity is as high as 7\10ml. For players who like to inhale deeply but don’t want to be too empty, this is a number that can satisfy a half-day to a day.

There are also some designs that are difficult to define:
. The Glaz series and the matching Titan PWMMod are both very radio-oriented products. They may not be widely accepted by the public due to their body shape. However, for the supporters of SteamCrave, this unique feature is the biggest The charm of it.