Vapefly Jester POD

Vapefly Jester POD

It has been almost a year since the POD became popular. The simple pen shape and egg shape have evolved into AIO compatible with finished cores and adjustable tiles. Recently, it is the leader of POD with RBA kit. Today Vapefly’s Jester POD is a member of RBA POD.

It has a traditional curve, but it brings out seven different styles of colors: calm atmosphere, youthful vitality, strange and heterogeneous, just like its name Jester, it may be black humor, direct funny, tactfully play stupid, make users happy A smile is its purpose.

Very light weight but with 1000mAh high power, 1A charging speed, three strong output power, direct and strong taste, adjustable air intake, two kinds of finished cores of steel mesh and coil, RBA kit, oil injection and double layer The stability of the upper cover is a characteristic of Jester.
Its output is 3.3, 3.8 and 4.3V, which are also rare high power in today’s POD. The first two are suitable for use with the attached 0.5Ω steel mesh and the additional 1.2Ω coil core. If you like it as much as I do Players who set their own settings and emphasize the taste, the smoke atomized through it is absolutely satisfying.

Vapefly Jester POD

At present, most RBA PODs are mostly in RTA form. In other words, players may also need ohm machines or other boxes to assist in burning the wires before and after use. This more or less increases the troublesomeness and the limited package size. There are also certain techniques for wire racking. Requirements are also the main reason why I think RBA POD is not easy to promote.
Jester looked at these partners with a smile and said nothing. As the first RDTA POD, it can burn the wire directly. Compared with ordinary atomizers, the wire rack and open space can be said to be the most convenient I have used. The RBA POD can be set quickly and easily by checking the number of turns of the target resistance value with the APP or webpage. With the mini atomization chamber and the oil injection hole independent of the side, it is not only friendly to use, but also the thickness of the taste. excellent.
The finished core or RBA is in the form of oil filling and the two-layer outer cover makes it stable enough when it is carried out. If you want to try to tie the cord, even if the cotton stuffing skills are not enough, just be careful not to turn it upside down, RDTA The structure is not easy to cause serious oil leakage.

In addition to the HMBL salt oil, the tested oils are also made with Humble 6mg and some tea-based salt oils. The pure oils are impeccable, and it is pure violence, but the cooling sensation may be possible under large amounts of evaporation. It will be enlarged with it, so pay attention to it; the compound aroma oil product has a double enjoyment of the taste and smell under the stack of smoke and the short flue. For the HMBL mango pineapple, it is sweet and sour and slightly warm. It is almost as beautiful as the performance of a normal atomizer.
The evaporation of Jester is considered the first stage of the POD I have used. Even at the lowest output, I can clearly feel the temperature of the flue gas, but does it affect the life of the finished core? It cannot be denied that 4~5 is the best taste period in the warehouse, but the decline period in the second half is very slow, even if it is a mixture of tea and fruit oils with similar tonality, a steel mesh currently tested With one coil, it can support more than 10 bins, and the other steel mesh used for Ding fluid oil is almost 9 bins.

Vapefly Jester POD

Jester has a pure POD version and a full version with RBA kit. Open the latter. The contents include Jester body, finished core cartridge, RBA cartridge, screwdriver, screw and O-Ring spare parts, two 1Ω A1 coils , Cotton and instructions.

Vapefly Jester POD

The pure black Jester is really low-key. There are only the firing button, cartridge buckle and USB port on the fuselage. However, the firing button is the same as the pair of green eyes printed on the outer box. Low and high power displays purple, red, and green light on both sides of the firing key.
The bottom of the finished core cartridge is an adjustment ring that controls the resistance to suction, while the RBA cartridge cannot be adjusted, but its resistance is similar to that of paper cigarettes. Excessive evaporation brings about condensation that may accumulate, while Vapefly raises the electrode end, even if there is condensation, it will first accumulate in the grooves at both ends.

Vapefly Jester POD

Jester’s finished cigarette cartridges are protected against leakage. The outer cover fixed by the spring can only be opened by pressing the small recessed tenon at the bottom. The oil filling hole on the upper edge also has additional soft pads, cores and adjustment rings. There are three O-Rings to increase air tightness. Another highlight is the steel mesh on the top of the finished core, which not only has the effect of fixing the cotton, but also prevents the condensation in the flue from being too concentrated in the center, thereby increasing the life of the core.
Its outer cover is thicker, but the designed curve and width make it not uncomfortable when you are in the mouth, and it also prevents extra air from entering and creating a resolution hole.
Remove the upper cover directly, the RBA cartridge also uses the form of oil filling, and the bottom is an independent air flow channel, and the part of the condensation that is not emitted from the flue will be accumulated here first. However, because the oil storage area of its cartridge has a double-layer structure, the advantage is that the liquid inside is not easily exposed to direct sunlight, and it is relatively difficult to observe the amount of residual oil.

Jester uses a double-pole wire rack, and it also has a pressure relief hole to facilitate the discharge of internal air during oil filling. The atomization chamber is placed on the upper cover and has a small bell-shaped dome.
Although the 3.0mm coil can be erected as long as the thick wire diameter is not used, the inner air inlet cannot fully affect the coil. I am not used to the obvious temperature that has been used for a long time, and the coil diameter of 2.5mm and above is suitable for cotton The feet are further thinned, so it is recommended that the maximum circle diameter is still 2.0mm.
Although the old drivers should know it, I would like to remind you that the cotton feet of the RDTA do not have to touch the bottom. The long oil guide path may not only affect the experience of long-term and continuous firing, but the amount of cotton is too thick. More likely to cause scorch.
At first, I was worried that the oil guide could not keep up with the power. I deliberately reduced the amount of cotton in the cotton foot. Later, I proved that I was just worried. However, I also accidentally tested the oil leakage caused by the plug cotton not in place. At this time, most of the smoke liquid It will seep from the edge of the atomization chamber in the cartridge and be blocked by the upper cover. After a long time or the amount of oil is too much, it will slowly flow from the edge of the upper cover to the port wall where the host and the cartridge are connected, including this The stability of the second and subsequent re-stuffing feels quite satisfactory to me
At present, there are two PODs that I can feel the temperature most. One is the previously released TIX. I did not expect to meet Jester afterwards. As mentioned at the beginning, in the POD with RBA kit, Jester is definitely good at friendliness. It has the demeanor of an atomizer from the wire frame, the burning wire to the stuffed cotton.