Who is it? It TIX–Rincoe TIX POD

Who is it? It TIX–Rincoe TIX POD

Hello, everyone. Whether it’s the Mechman of a pole or a box or today’s TIX POD, I feel that the style of the designer of Rincoe is really hard-core, iron chains, metal elements of the fuselage, punk or rock’s buckle patterns, these Both are the flesh and blood of TIX.

TIX–Rincoe TIX POD

1000mAh, Type USB-C port, 1A fast charge, three-stage output, they have achieved the endurance and popular personality of TIX; flat nozzle, adjustable air intake, and two optional AIO designs of finished cores, they promote TIX In the breadth and depth of the smell. It is not uncommon for most of the above structures to be disassembled, but it is not common to have all integrated machines.
TIX has three levels of output: 3.3, 3.65V and full firepower similar to Bypass mode. Its finished core is 0.8 steel mesh and 1.0 coil, which somewhat suppresses the richness of smoke and increases battery life, but purely power is the priority The small-volume POD positioned today is still a heterogeneous existence. Cooperating with the air intake of light lungs to moderate mouth suction, the flat mouthpiece brings complete mouthiness, making it a POD compatible with butyl liquid and butyl salt oil.

It comes with a strap and a metal buckle is available for purchase. I think the Blazing Skull is the best match among the seven decorative versions. In addition, Rincoe’s LOGO on the side panel is quite ingenious, I believe There must be players who do not like to read the manual mistakenly believe that it is a type of inhalation shot. In addition to the firing button, there is also an independent mode switch button on the narrow side of the fuselage, and the battery indicator and the mode indicator are located above and below the switch button, which can be used quickly and intuitively.
Although the TIX air intake channel is covered inside the fuselage, in actual use, there will be some condensation accumulation inside roughly after two or three compartments, and it can be simply wiped off by removing the trim and the cartridge. At the same time, the design of the cartridge is also conducive to cleaning and daily carrying, and the consideration of the use surface is quite worthy of recognition.

With the experience of using two cores each, the best taste is almost all around 4~6 bins. Considering its strong output, it is a pretty good result. The feeling of the 1.0 coil is not much surprise. After all, this range is more inclined to face players with high concentration of salt oil of 50NS or light taste. With medium or strong output, it can create most of the flavor of POD with medium resistance.
0.8 Steel mesh can begin to truly experience the wildness of TIX, especially the three American HMBL oils that I started at the same time, the most obvious, even if I just wake up and have not been in contact for a long time, I may not be able to hold the lowest Pulmonary pressure caused by output. HMBL’s own layering is one of the richest in salt oil I have ever played: Blue Blood’s refreshing skittle acidity, Mango Pineapple’s gentleness and roundness, and delicate experience of the freshness of Apple Pear Watermelon, relying on the strong output and steel of TIX The natural oil conduction and analysis advantages of the net structure, you want to analyze and taste each layer of aroma or the abundance of a single brain, all are in your hands. As for some oils with simpler tonality, I suggest serving them with the highest output of TIX, which is a brand-new sense of interpretation, even somewhat close to the experience brought by RBA.

TIX–Rincoe TIX POD

Open the outer box of the pull and the heaven and earth cover. The contents are the TIX body, two cores, tie rope, charging cable, bilingual instructions in Chinese and English, warranty card and warning slogans.

TIX–Rincoe TIX POD

The size of the TIX removed from the magazine is approximately the same as the palm of an adult man. The Rincoe LOGO on the front is also a firing button, and the outer periphery of the resin decorative plate has reflective silver lines and the manufacturer’s words to increase recognition.

After removing the back panel, the air intake needs to be adjusted steplessly by the silver knob under the magazine. Although a little smoke will be enclosed inside, it will take at least two or three bins to produce some condensation, perhaps in winter. It will be more obvious, but you can quickly remove the magazine from the horizontal and wipe it by just buckling the nozzle, and maintenance is very easy.

TIX–Rincoe TIX POD

TIX’s magazine design hides a lot of ingenuity. The oil guide hole on the side is blocked by a rubber soft plug. The groove directly above can jam the soft plug to facilitate oil injection; the suction nozzle is attached to the mouth to facilitate recycling Condensation angle, and there is oil storage space on both sides of the flue. When the cartridge is rotated 90 degrees clockwise to fill the oil, this space can be used to store the extra cigarette liquid, and it also has the function of observing the amount of residual oil.
When the lens returns to the camera body, the right end can see the hole through which the rope or buckle can pass. The left side is near the electrode terminal is the air inlet, and from the top to the bottom is the output mode indicator, mode switch button, Power indicator and USB-C port; both indicators use green, blue, and red to correspond to three output or residual power from high to low.

TIX–Rincoe TIX POD

The components of TIX cartridges can be broken down into (forgot to remove) the air intake adjusting ring, the lower cover, the finished core and the magazine. In order to ensure that the core and the flue of the nozzle can be completely sealed, the top of the core also has a large O-Ring covers the area, and this design can also constrain the cotton and coil positions inside the core.

If I ask which of the PODs I have used can most feel the temperature (physical), it must be TIX. At low Eurocore and medium and high output, the right flue length can effectively conduct slightly warm smoke. This is the environment that I like to use in tobacco and milk oils; high European core and low output are transformed into a normal temperature appearance, especially suitable for fruit and tea oils, with the current POD air intake with a wide adjustment range It also has a good oil compatibility.For more information, please go to www.vapeciga.com